DESCRIPTION:

ALKEN EVEN-FLO® 911 is a surfactant-catalyst blend designed to improve fuel economy and reduce smoking in oil-fired engines and turbines, and to control injector fouling and deposit build-up in the combustion and exhaust areas of Diesel engines.

BENEFITS:

• Cleans deposits from dirty engines.
• Improves fuel-air blending.
• Increases combustion efficiency.
• Reduces smoking.
• Reduces maintenance and downtime for overhauls.
• Provides better all-around operation and power.
• Minimizes sulfur residue adherence.
• Carries a "COMBUSTIBLE" label for transportation
• Minimizes acid-sulfate (sulfur) corrosion.
• Assures maximum engine life through reduced wear.

DOSAGES:

ALKEN EVEN-FLO® 911 treatment should be applied at the rate of 1 gallon per 1000 gallons of fuel. After sufficient operating time for the combustion system to stabilize, dosage can be adjusted up or down as needed to arrive at the minimum dose needed to achieve the desired results. For onroad applications (outside the US), a higher dose can be safely used to rapidly clean out a dirty engine (see California case study), but does not offer the same economy for long term use.

PLEASE NOTE: The only manganese that is authorized by the USEPA as a fuel treatment ingredient for onroad use is MMT. This product contains another, less expensive manganese, so this formulation is no longer EPA registered for on-road applications in the United States.

PACKAGING AND HANDLING:

ALKEN EVEN-FLO® 911 is shipped in containers conforming to Performance Oriented Packaging specifications. Contains aromatic hydrocarbons. Safety goggles and neoprene gloves are recommended when removing from drums. Handle in a well-ventilated area to minimize exposure to vapors. Combustible. Store and use away from heat, flame, or other ignition sources. 

Updarte: April 27,2006